Ansiktssköld för små 3D-skrivare 3D-modell
1
Personlig användarlicens
0
besök
0
Nedladdningar
Insänd av
cancian123
Specifikationer
- Geometri
- polygoner0
- hörn0
- strukturerNo
- materialNo
- riggadeNo
- AnimeradNo
- 3D Printable ReadyNo
- Spelklar (låg poly)No
- UV MappadYes
Beskrivning
Face shield for small 3D printers
This is a face shield for printers with small printing area. In order to build one, your are going to need:
-A 3D printer with printing area of 120mm X 120mm
-3 M2x10mm screw with nuts-30cmX30cm acetate sheet or anything similar
-1 washer
-dishwashing sponge
-duoble sided tape
Instructions:
The midlee screw of the printed support must be placed in the middle of the acetate sheet and 90mm below its top.
Fix the dishwaching sponge with the double sided tape on the back of the printed support.
I have been printing planties of this masks to help nurses and doctor here in my country. We have been facing lots of problems to find personal equipment.I hope you all can help some people.
This is a face shield for printers with small printing area. In order to build one, your are going to need:
-A 3D printer with printing area of 120mm X 120mm
-3 M2x10mm screw with nuts-30cmX30cm acetate sheet or anything similar
-1 washer
-dishwashing sponge
-duoble sided tape
Instructions:
The midlee screw of the printed support must be placed in the middle of the acetate sheet and 90mm below its top.
Fix the dishwaching sponge with the double sided tape on the back of the printed support.
I have been printing planties of this masks to help nurses and doctor here in my country. We have been facing lots of problems to find personal equipment.I hope you all can help some people.
Apr 10, 2020
datum tillagt
Apr 12, 2020
senaste uppdateringen
kommentarer
Det finns för tillfället inga kommentarer till denna modell.
Du kan lägga till den första.